Installing your Bar Sack

pictures coming soon

If using Jack's Sacks Supplied Straps

1) Wrap the velcro around the bar with the smooth side facing the bar

2) Loop the vecro through the plastic square loop. 

3) Pull velcro back to tighten

4) Press prickly sides together. Trim if necessary. 

5) To prevent bag from flopping around, route shock cord around the head tube or under it. 

6) Pass cord through the loop on other end, Install cordlock if previously removed

7) Pull and tighen cord lock. 

8) Cut excess cord, leaving a couple inches. Tuck out of way if necessary or tie a knot. 

NO PART OF BAG OR CORD SHOULD CONTACT YOUR WHEEL OR PREVENT STEERING